Tensile Strength And Soft Touch Control Method Of Non-woven Fabric
- Author:Junqian Nonwoven
- Source:Junqian Nonwoven
- Release on:2019-06-13
To put it simply: it is not woven and braided together by one yarn, but the fibers are bonded together directly by physical means.
Non-woven fabrics(China PP Spunbond Wholesale) have changed the original textile theory, and they are widely used because of their wide use, low cost, high output value, fast production speed and short process flow.
Since the non-woven fabric is produced from polypropylene, if it is too hard, it is relatively brittle, the pulling force is very bad, and it is easy to present the cracking of the non-woven fabric.
Most manufacturers like to make hard materials, because the fabric of the same weight is much thicker than the pure material after the fabric is hard.
Hard material production is a process commonly used by non-woven fabric manufacturers(Embossed Non-Woven Fabric On Sales). Because the fabric is soft, the hand feel is relatively thin, and the soft material feels soft and close to the actual knitted fabric. The toughness of the fabric is strong and the tear strength is not easy to tear.
The non-woven fabric(Spunbond Polypropylene Fabric Company) with a high temperature is harder, and the fabric with a lower temperature is softer. The non-woven fabric requires a soft and hard texture, which is achieved by controlling the temperature during the production process.