Home > News > Product knowledge > Introduction of FFP3 melt blow.....
Hot-sell product
Contact us
Guangzhou Junqian Nonwoven Co., Ltd.
Foshan Guide Textile Co., Ltd.

Sales Hotline: + 86-757-85700009
Customer Service Hotline: + 86-757-85756089
Email: sales2@guideco.cn
Address: Yonghao Industrial Park, Yongqing Rd., Yanbu, Dali Town, Nanhai Dist., Foshan, G.D. 528247, CHINAContact Now

News

Introduction of FFP3 melt blown cloth and melt blown cloth oiliness test

  • Author:GUIDE TEXTILE
  • Source:GUIDE TEXTILE
  • Release on:2021-07-05
Introduction of FFP3 melt blown cloth and melt blown cloth oiliness test

Related testing values ​​of FFP3 melt blown cloth:

Gram weight g: 25/40/50

Width mm: 175/260

color: White

Test resistance: Pa<200

Test requirements: 25 grams of three layers/40 grams of double layers/50 grams of single layers

Test flow: L/min oily 95/salt 85/BFE32

Oily particulate matter filtration rate %: >99

Salt particulate matter filtration rate %: >99

Bacterial filtration rate BFE%: >99

Reference index EN149: 2001+A1:2009

Manufacturing standard: FZT64078-2019

FFP2 Filter Supplier, Melt Blown Filter Company, Fabric Face Mask On SalesFFP2 Filter Supplier, Melt Blown Filter Company, Fabric Face Mask On Sales

Regarding the oily filtration efficiency of melt blown cloth, the following points should be paid attention to:

1. The quality of the meltblown cloth itself should be high, and it is best to achieve 95+ under the salty single layer 85 flow rate.

2. On this basis, change the masterbatch.

3. The standard of FFP3 is 99.97 at oily 95 flow rate.

4. Because paraffin oil is particularly easy to penetrate, it is recommended that you do the oily double layer 95+ for the time being, the single layer is too difficult.

5. Through analysis of a large number of meltblown cloth oil filtration efficiency data, the single layer can pass 87 and the double layer can pass 99, which can at least reach the FFP2 level.

The filtering effect of oil-based meltblown cloth is related to the particle size on the one hand, and is also affected by whether the particles contain oil. Oil-free particles such as dust, water-based mist, paint mist, oil-free smoke, microorganisms, etc. Although the filter materials of "non-oily particulate matter" are relatively common, they are not suitable for oily particulate matter, such as oil mist, oil fume, pitch fume, and coke oven fume. The filter material suitable for oily particles can also be used for non-oily particles.