>> Non Woven Expert Who You Trust <<

Non-woven Material For Mask Products

Home > News > Product knowledge  > Non-woven Material For Mask Products

Hot-sell product

Contact us

Guangzhou Junqian Nonwoven Co., Ltd.
Foshan Guide Textile Co., Ltd.

Sales Hotline: + 86-757-85700009
Customer Service Hotline: + 86-757-85756089
Email: sales2@guideco.cn
Address: Yonghao Industrial Park, Yongqing Rd., Yanbu, Dali Town, Nanhai Dist., Foshan, G.D. 528247, CHINA

Non-woven Material For Mask Products

2020-04-13 17:23:03
Medical masks generally use an SMS (spunbond-meltblown-spunbond) composite multilayer structure. The S inside and outside is spunbond nonwoven fabric, English is Spunbond; the middle M is meltblown nonwoven fabric, English is Melt blowing.

The outer layers of medical surgical masks(Earloop Face Mask Manufacturer) and medical N95 masks need to use waterproof non-woven fabrics, which are mainly used to isolate patients' droplets and blood; the middle of medical N95 masks is a thicker melt-blown non-woven fabric, which has very Good filterability, the inner layer is ordinary non-woven fabric.

The filter layers of industrial dust masks(Nose Mask Factory) are mostly melt-blown non-woven fabrics, or HEPA filter paper made of melt-blown non-woven fabrics.

The filter cotton and electrostatic cotton of the gas mask also use melt-blown non-woven fabric, and the high-end dust box uses the HEPA filter element.

For masks, it is not the melt-blown non-woven fabric interlayer or the SMS structure that can effectively filter the particulate matter. Generally speaking, the melt-blown non-woven fabric must have a weight of more than 20 g / m2 to have a better quality. Filter effect.

Earloop Face Mask Manufacturer, 3 Ply Face Mask Vendor, Nose Mask FactoryEarloop Face Mask Manufacturer, 3 Ply Face Mask Vendor, Nose Mask Factory

The weight range of melt-blown non-woven fabrics is generally 15-500 g / m2, and the melt-blown non-woven fabrics used in masks are light and thin. In contrast, the T-shirt we wear in summer weighs about 150 grams. The thickness of the melt-blown non-woven fabric is very important for masks(3 Ply Face Mask Vendor) with different filtration levels.

20 ~ 25 grams weight: BFE≥95, medical surgical mask standard is BFE≥95% (antibacterial), PFE≥30% (antivirus)

40 ~ 45g weight: National standard KN90 mask

50 ~ 55 grams weight: National standard KN95, American standard N95 mask

75 ~ 90g weight: National standard KN100, American standard N99 mask

Disinfection treatment of melt-blown non-woven fabric will not significantly change the shape of the fiber, nor does alcohol spray necessarily reduce the filtering ability of the mask significantly. but! but! but! This does not mean that you can safely wear a disinfected mask. The China CDC issued the "Guidelines for the Selection and Use of Masks" and proposed that masks should be saved when not in the province, and not when not. It should be flexibly selected according to the usage scenarios and protection requirements.